GTL-2872, KILBY Switch Gigabit in fibra gestito L3 Lite a 28 porte, 4 x 10GbE SFP+, 4 x Gigabit SFP/RJ45 Combo
Numero di modello
GTL-2872
SKU
57081503
Lo switch GTL-2872 è uno switch di accesso Gigabit Ethernet con quattro porte di uplink 10G. Lo switch è ideale per i provider di servizi Internet (ISP) e gli operatori di sistemi multipli (MSO) per fornire agli utenti domestici servizi triple-play con una larghezza di banda fino a Gigabit. È anche uno switch di accesso Gigabit ideale per reti SMB, aziendali e universitarie. Lo switch GTL-2872 è ricco di funzionalità che offrono elevata disponibilità, sicurezza completa, robusto controllo multicast e QoS avanzato all'edge della rete, pur mantenendo una gestione semplice. Lo switch supporta anche la gestione IPv6 più avanzata, la sicurezza IPv6 e il controllo multicast IPv6 in conformità con la crescita della distribuzione IPv6. Gli ISP possono espandere i propri servizi da utenti domestici a utenti aziendali fornendo una rete più affidabile e resiliente (ITU-T G.8032 ERPS), VPN L2 e funzioni OAM (Operations, Administration, and Maintenance) avanzate per garantire accordi sul livello di servizio.
| Port Configuration | |
|---|---|
| Console RJ45 | 1 |
| Gigabit RJ45/SFP combo | 4 |
| Gigabit SFP | 20 |
| Logistics Data. | |
| Codice del sistema armonizzato (SA) | 851762 |
| Codice prodotto doganale (TARIC) | 8517620000 |
| Power. | |
| Ridondanza di potenza | Dual Power Supplies |
| General. | |
| Colore | Nero |
| EAN | 4015867203064 |
| Numero di modello | GTL-2872 |
| Features 1. | |
| Caratteristiche |
L2 Features Tri-speed (10/100/1000BASE-T) copper interfaces Auto-negotiation for port speed and duplex mode Auto MDI/MDI-X 100M/1G fiber interface SFP ports support: IEEE 802.3z (1000BASE-SX/LX/LHX/ZX) transceivers 1G/10G fiber interface SFP+ ports support: IEEE 802.3ae changeable (10GBASE-SR/LR/ZR/ER), IEEE 802.3z (1000BASE-SX/LX/LHX/ZX) transceivers 10G DAC/AOC Digital Diagnostic Monitoring (DDM) on 1G SFP and 10G SFP+ port Transceiver-threshold current/rx-power/temperature/tx-power/ voltage/high-low alarm and warning Flow Control: IEEE 802.3x for full duplex mode Back-Pressure for half duplex mode Jumbo frames: 12 KB Broadcast/Multicast/ Unknown Unicast Storm Control Spanning Tree Protocol: IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), 64 instances Spanning-tree restricted-tcn Spanning-tree tc-prop-stop Stops propagation of topology change information BPDU Guard BPDU filtering Root Guard BPDU transparent Loopback detection Non-Spanning Tree Loopback detection ITU-T G.8032 Ethernet Ring Protection Switching: Sub 50 msec convergence Non-revertive operation mode Multiple-ring topology Mulitiple instance VLANs: Supports 4K VLAN Port-based VLAN IEEE 802.1Q VLAN GVRP (256 VLAN) IEEE 802.1v Protocol-based VLAN IP Subnet-based VLAN MAC-based VLAN Traffic Segmentation L2 Virtual Private Networks (Q-in-Q): Selective QinQ VLAN Translation L2 Protocol tunneling (xSTP, CDP, VTP and PVST+, LLDP) CDP/PVST+ Filtering Link Aggregation: Static Trunk IEEE 802.3ad Link Aggregation Control Protocol Trunk groups: 16, up to 8 GE ports per group Load Balancing: SA+DA, SA, DA, SIP+DIP, SIP, DIP IGMP Snooping: IGMP v1/v2/v3 snooping IGMP Proxy reporting IGMP Filtering IGMP Throttling IGMP Immediate Leave IGMP Querier IGMP mrouter-forward mode IGMP router-alert-option-check IGMP router-port-expire-time IGMP tcn-flood IGMP tcn-query-solicit IGMP unregistered-data-flood MVR (Multicast VLAN Registration): Supports 5 multicast VLANs Port mirroring (many source ports to one destination port. One source port to one destination port only) Remote port mirror (RSPAN) Security User Security for Enterprise: IEEE 802.1X port based and MAC based authentication Dynamic VLAN Assignment, Auto QoS MAC authentication Web authentication Voice VLAN Guest VLAN User Security for ISP/MSO: L2/L3/L4 Access Control List MAC Access control list (Source/Destination MAC, Ether type, Priority ID/VLAN ID) IP standard access control list (Source IP) IP extended access control list (Source/Destination IP, Protocol, TCP/UDP port number) DHCP Snooping DHCP Option 82 DHCP Option 82 Relay IP Source Guard Network Security: IPv6 ACL Port security Sticky MAC PPPoE IA Dynamic ARP Inspection CPU guard CPU/Memory threshold and alarm Denial of Service protection echo-chargen smurf tcp-flooding tcp-null-scan tcp-syn-fin-scan tcp-xmas-scan udp-flooding win-nuke Management Security: Login Security RADIUS authentication RADIUS accounting TACACS + authentication TACACS + accounting TACACS + authorization Management Interface Access Filtering (SNMP, Web, Telnet) SSH (v1.5/v2.0) for security Telnet Cipher: aes192-ctr aes256-ctr aes256-gcm@openssh.com chacha20-poly1305@openssh.com aes128-ctr aes128-gcm@openssh.com KEY ssh-rsa rsa-sha2-512 rsa-sha2-256" in below SSL for HTTPS SFTP IPv4/ IPv6 SNMPv3 OAM IEEE 802.3ah Link IEEE 802.1ag Connectivity Fault Management: Connectivity check Loopback Linktrace ITU-T Y.1731 Performance and Throughput Management: Frame Delay Frame Delay variation QoS Features Priority Queues: 8 hardware queues per port Traffic classification: IEEE 802.1p CoS IP Precedence DSCP MAC Access control list ( Source/Destination MAC, Ether type, Priority ID/ VLAN ID) IP Standard access control list (Source IP) IP extended access control list (Source/Destination IP, Protocol, TCP/UDP port number) Traffic Scheduling: Strict Priority Weighted Round Robin Strict + WRR Ingress policy map (police rate, remark CoS) Egress policy map (police rate, remark CoS/DSCP) Rate Limiting (Ingress and Egress, per port base): GE: Resolution 64Kbps ~ 1,000Mbps Auto Traffic Control IPv6 Features IPv4/IPv6 Dual Protocol stack IPv6 Address Types Stack: Unicast IPv6 Neighbor Discovery: Duplicate address Address resolution Unreachable neighbor detection Stateless auto-configuration Manual configuration Remote IPv6 ping IPv6 Telnet support HTTP over IPv6 SNMP over IPv6 IPv6 Syslog support IPv6 TFTP support IPv6 MLD filter: MLD max-groups (throttling) IPv6 ND snooping MLD Snooping v1/v2 IPv6 source guard DHCPv6 snooping MVR6 TACACS IPv6 Routing IP interface IPv4/v6: 256/128 (Shared) IPv4/IPv6 Static Route Host route IPv4/v6: 4K/2K Net route IPv4/v6: 512/128 DHCP Server RIP v1/v2 Management Switch Management: CLI via console port or Telnet Web management SNMP v1, v2c, v3 IP clustering (32 members) Firmware & Configuration: Firmware upgrade via TFTP/HTTP/FTP server Dual images Multiple configuration files Configuration file upload/download via TFTP/HTTP/FTP server Firmware auto upgrade RMON (groups 1, 2, 3 and 9) BOOTP, DHCP client for IP address assignment DHCP dynamic provision option 66,67 SNTP/NTP IPv4/ IPv6 DNS client Event/Error Log Syslog SMTP Support LLDP (802.1ab) IPv4/ IPv6 sFlow v4, v5 Cable diagnostics Traceroute Traceroute6 DHCP server (8 pools, 512 IP addaress) TWAMP probe and responder |
| Risparmio energetico | IEEE 802.3az (Ethernet ad alta efficienza energetica) |
| Miscellaneous. | |
| Grado | Commerciale |
| PoE supportato | No |
| Gestibile | Sì |
| Senza ventola | No |
| Porte contemporanee | 28,00 Total |
| Serie | Serie KILBY |
| Performance 2. | |
| Capacità di commutazione | 128Gbps |
| Physical Specifications. | |
| Peso del prodotto (kg) | 2.82 |
| Dimensioni (L x P x A) | 440 x 220 x 44 mm |
| System Specifications. | |
| Alimentazione | 1 x Terminal Block 1 x AC power1 x Terminal Block 1 x AC power |
| Data Rate. | 10Gbps, 1Gbps |
| Alimentatore incluso | Sì |
| Ingresso di alimentazione |
100-240VAC, 50-60Hz DC Power Input (48-60VDC) |
| Consumo di energia | 21.48W |
| MTBF | 298,951hrs(25 degree C) |
| Velocità di inoltro dei pacchetti | 95Mpps |
| Standard |
IEEE 802.3 10-BASE-T, Ethernet IEEE 802.3u 100-BASE-TX, Fast Ethernet IEEE 802.3ab 1000BASE-T, Gigabit Ethernet IEEE 802.3ad Link Aggregation Control Protocol IEEE 802.3ae changeable (10GBASE-SR/LR/ER) IEEE 802.3z (1000BASE-SX/LX/LHX/ZX) transceivers, and 10G DAC/AOC IEEE 802.3x Flow Control IEEE 802.3x for full duplex mode , Back-Pressure for half duplex mode IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) |
| Montaggio | Montaggio a rack da 19 pollici |
| Dimensione della memoria flash | 256 MB |
| Dimensione della RAM | 512MB |
| Tabella indirizzi MAC | 16K |
| Cornice Jumbo (KB) | 9 |
| Indicatori | PWR, DIAG, LINK |
| Backplane (Gbps) | 128 |
| Others. | |
| Approvazione e conformità | FCC,CE, CISPR Class A, BSMI, VCCI, UL (CSA 22.2. NO 60950-1 & UL60950-1),CB (IEC60950-1) |
| Umidità di esercizio | 10% RH ~ 90% RH |
| Temperatura di esercizio | 0°C ~ 50°C |
| Umidità di stoccaggio | 10% RH ~ 90% RH |
| Temperatura di stoccaggio | -40°C ~ 70°C |
| Contenuto della confezione |
GTL-2872, Power Cord, 19" Rack Mount Kit, Quick Installation Guide, Resource CD (User Manual, QIG) |
Download PDF